|
Post by Josh -Admin- on Jun 8, 2014 14:00:08 GMT 9.5
Hey the tank is a universal fit so on the bottom it has two bolts on the front and two on the back, it comes with clamps so it just secures to the frame, So make sure you don't get a Harley specific, this universal tank was $30 more expensive. Yeah that's sick but if you have an efi model hunter you can use them unles you get one that has a fuel pump
|
|
|
Post by Benno on Jun 8, 2014 16:12:59 GMT 9.5
That bike is fantastic. Hard to believe it's the same one I saw only weeks ago.
|
|
|
Post by frisco1970 on Jul 2, 2014 15:40:29 GMT 9.5
Hey guys finally back for another update
this time i have been installing the hand control switches, i bought a few toggle and rocker switches and relocated them off the handle bars
the only one one the bars is the indicator switch
the lights switches i put just in front/ above of the carby
the starter button is hidden away under the gas tank
and the engine cut off is under the bars in the middle
the horn and flasher i have removed for now, ill most likely relocate the horn somewhere later or if i have to for rego reasons.
the only problem i had was with the lights switches, finding what does what and what wires to connect to the new switches but otherwise it was pretty simple.
I have also fitted the exhaust pipes all i have to do is wrap them up, the problem i had here was the new pipes were a bit bigger than the old ones so the pipe that goes into the engine was too big, so u had to cut a weld the tips from the old pipes
|
|
|
Post by frisco1970 on Jul 2, 2014 15:41:35 GMT 9.5
|
|
|
Post by frisco1970 on Jul 2, 2014 15:42:14 GMT 9.5
|
|
|
Post by frisco1970 on Jul 2, 2014 15:42:55 GMT 9.5
|
|
|
Post by frisco1970 on Jul 2, 2014 15:43:18 GMT 9.5
|
|
|
Post by frisco1970 on Jul 2, 2014 15:50:35 GMT 9.5
|
|
|
Post by Benno on Jul 3, 2014 3:05:28 GMT 9.5
Great to see an update man.
|
|
|
Post by Rohan on Jul 3, 2014 9:42:55 GMT 9.5
Yeah keep at it, you'll have it looking awesome by the spring/summer season!
|
|
|
Post by frisco1970 on Jul 17, 2014 22:04:10 GMT 9.5
Hey Guys Hows everyone doing
Back with another update this week i managed to do a few things, i installed a side mount speedo, new ignition switch and exhaust wrap
the speedo was a bit of an F around, there was so many wires to connect and i couldnt get the neutral light to work but got it in the end turns out i had some wires crossed, otherwise it was smooth sailing as always, i cut some spare metal into an L bracket to mount it.
|
|
|
Post by frisco1970 on Jul 17, 2014 22:05:17 GMT 9.5
|
|
|
Post by frisco1970 on Jul 17, 2014 22:07:41 GMT 9.5
|
|
|
Post by frisco1970 on Jul 17, 2014 22:10:38 GMT 9.5
The ignition switch was very simple to install, theres only three wires, i bought a nice little bracket and found a perfect size bolt under the gas tank to mount it, probably the easiest thing ive done so far, it looks great and its much smaller than the original
|
|
|
Post by frisco1970 on Jul 17, 2014 22:11:18 GMT 9.5
|
|