hulkn
Junior Member
Posts: 75
|
Post by hulkn on Jul 2, 2014 12:43:37 GMT 9.5
Hey guys, trying to confirm details on handlebars and controls etc as I do want to get something different... as I understand it the hunters are 1" centre and 7/8 on the end IE all the controls are 7/8? Seems to limit the options when looking around... 1. Any recommendations on places in Sydney that have a range? 2. How hard is the conversion to harley 1" controls? has anyone done this, what was the time involved etc? These guys sell a full kit - www.demonscycle.com/1-1-4-black-handlebars-m-bars-4-5-rise-with-hand-controls-switches-and-grips-for-harley.html is there anything to watch out for in experience if going to the harley controls etc
|
|
|
Post by Josh -Admin- on Jul 2, 2014 14:19:36 GMT 9.5
Hey mate If you wana use harley hand controls then you can just change the size of the handlebars so they fit, however if you change the bar size you will need to replace the risers that mount the bars the triple tree.
The hand controls won't be plug and play tho you will need to rewire it all not an impossible job but might take a little time.
So just to confirm do you want new hand controls or bars or both ?
|
|
hulkn
Junior Member
Posts: 75
|
Post by hulkn on Jul 2, 2014 15:12:24 GMT 9.5
I dont think I am going to find the right bars with 7/8 they just seem minimal on choice... Ideally I would like to stick with the original controls as it is obviously a lot easier
|
|
|
Post by Rohan on Jul 2, 2014 17:40:29 GMT 9.5
Have you asked hunter parts to see if they have what you are looking for?
|
|
|
Post by bobber on Sept 29, 2014 18:14:26 GMT 9.5
|
|
|
Post by Benno on Oct 1, 2014 15:14:33 GMT 9.5
Those bars will fit the controls bobber . However will be slack in the risers. You can buy shims for the risers, or 7/8" risers.
|
|